AVI-B Receiver (Presence Only)

The Model AVI-B receiver identifies vehicles equipped with a uniquely coded AVI-FCT or AVI-ATS transmitter. The receiver uses a loop coil installed in the driveway or roadway surface to receive the transmitter’s code. The receiver is factory programmed to identify one specific transmitter code and does not require any adjustments or setup. The receivers are operational immediately upon application of power.

Separate LEDs on the front panel indicate the presence of power and the presence of a valid-coded transmitter. The Model AVI-B has a single relay indicating the presence of a transmitter code.

** Don’t forget to order the Front mounted, 10-pin, MS3102A-18-1P harness **

ORDERING INFORMATION

• Input Power
  • AVI-B-1: 120VAC
  • AVI-B-22: 24VAC
  • AVI-B-30: 12/24VDC